Inputs & Outputs
To understand RM1 connectivity options, here's a list of all inputs and outputs, as well as their respective signal source / sink.
Inputs
Mic Inputs
| Connector | Comment |
|---|---|
| Mic 1 | Connect your Microphone |
| Mic 2 | Connect your Microphone |
Bluetooth Input
| Connector | Comment |
|---|---|
| Wireless (stereo) | Connect your Smartphone or other Bluetooth device. Use it e.g. to playback music, audio effects, or for call-ins. |
AUX Input
| Connector | Comment |
|---|---|
| AUX (stereo) | Connect your Smartphone or other device using a TRRS 3.5mm jack. Use it e.g. to playback music, audio effects, or for call-ins. |
Multichannel USB Input
All 16 multichannel USB input channels are received via 16 ch USB connector. ASIO and WDM is available for multichannel support.
| Channel | Comment |
|---|---|
| USB 1/2 | USB Stereo Input |
| USB Talk 3/4 | USB Stereo Input, used as a clean return to USB Out 3/4, e.g. for video calls. |
| USB 5/6 | USB Stereo Input |
| USB 7/8 | USB Stereo Input |
| USB 9/10 | USB Stereo Input |
| USB 11/12 | USB Stereo Input |
| USB 13/14 | USB Stereo Input |
| USB 15/16 | USB Stereo Input |
Stereo USB Input
Connected via stereo USB connector. stereo USB connector is class compliant and works with most devices. It acts as a talk output.
| Channel | Comment |
|---|---|
| USB Stereo | USB Stereo Input. Works as standalone input, or can be used for Talk, as a clean return to USB Stereo Output, e.g. for video calls. |
Dante Input
Dante Audio over IP is connected via Ethernet cable. For how to guides and functional requirements, check the documentation given by audinate: What is Dante?
The integrated Dante 4x4 interface is capable of running in AES67 mode. Learn More
| Channel | Comment |
|---|---|
| Dante 1/2 | Stereo Audio over IP Input |
| Dante 3/4 | Stereo Audio over IP Input. Works as standalone input, or can be used for Talk, as a clean return to Dante 3/4 Output. |
Outputs
Output routing can be done flexibly through the routing matrix, allowing you to route any input to any output.
Some outputs (such as Headphones) can only be routed stereo.
- Stereo outputs can use any of the sources listed above
- Mono outputs can use either the left or right channel of the Internal sum (Internal sum L/R)
Available Output Sources
The internal routing option allows you to assign various sources to your outputs. See output routing.
Sum & Monitoring Sources
These sources provide the internal mix with or without pre fader listening.
| Source Group | Available Options | Description |
|---|---|---|
| Mix | Internal sum | Main mix output |
| Monitoring | Sum + PFL, PFL | Main mix (sum) and Pre-Fader Listen (PFL) monitoring or PFL only |
Talk Sources (Clean Feed)
Use these sources for monitoring and
| Source Group | Available Options | Description |
|---|---|---|
| 16ch USB Talk | USB 1/2 talk, USB 3/4 talk, USB 5/6 talk, USB 7/8 talk | Clean feed returns for USB connections |
| USB Stereo Talk | USB Stereo talk | Clean feed returns for USB stereo connection |
| Bluetooth Talk | Bluetooth talk (mono) | Clean feed return for Bluetooth input. Stereo source is summed to mono. |
| Aux Talk | Aux Talk (mono) | Clean feed return for Aux input. Stereo source is summed to mono. |
| Dante Talk | Dante 1/2 talk, Dante 3/4 talk | Clean feed returns for Dante connections |
Direct Source Routing
Use these sources to directly capture an input by routing it to an output.
| Source Group | Available Options | Description |
|---|---|---|
| Microphone | Mic in 1+2 (stereo outputs) / Mic 1, Mic 2 (mono outputs) | Direct microphone inputs |
| Aux | Aux in | Direct aux input |
| Bluetooth | Bluetooth in | Direct Bluetooth input |
| 16ch USB | USB in 1/2 .. USB in 15/16 | Direct USB input channels |
| Stereo USB | USB Stereo in | Direct USB input channels |
| Dante | Dante 1/2, Dante 3/4 | Direct Dante input channels |
Processed Channels
Channel 1 and 2 can also be output after processing, but pre-fader.
| Source Group | Available Options | Description |
|---|---|---|
| Channel 1 processed | Ch 1 processed L/R | Direct output of channel 1 after processing but pre fader |
| Channel 2 processed | Ch 2 processed L/R | Direct output of channel 2 after processing but pre fader |
Processed channel output sources are only available for mono routed outputs.
Headphone Output
| Connector | Default Source | Comment |
|---|---|---|
| HP 1 (Stereo) | Internal sum + PFL | Use to listen to your own voice and monitor all other signals. When you press PFL, the signal will be replaced by the channel in PFL. |
| HP 2 (Stereo) | Internal sum + PFL | Use to listen to your own voice and monitor all other signals. When you press PFL, the signal will be replaced by the channel in PFL. |
Speaker / Line Output
| Connector | Default Source | Comment |
|---|---|---|
| Out 1 (mono) | Internal sum + PFL L | Use to listen to your own voice and monitor all other signals. When you press PFL, the signal will be replaced by the channel in PFL. |
| Out 2 (mono) | Internal sum + PFL R | Use to listen to your own voice and monitor all other signals. When you press PFL, the signal will be replaced by the channel in PFL. |
Speakers can be automatically muted if a microphone is switched on. This is to prevent unwanted audio feedback. Mute speakers when mic is on setting will disable / enable this feature.
Bluetooth Output
| Connector | Default Source | Comment |
|---|---|---|
| Wireless (mono out, stereo sink) | Bluetooth talk | Connect your Smartphone or other Bluetooth device. This is a Cleanfeed return signal which outputs signal sum without bluetooth input to prevent feedback. |
AUX Output
| Connector | Default Source | Comment |
|---|---|---|
| AUX (mono out, stereo sink) | Aux talk | Connect your Smartphone or other device using a TRRS 3.5mm jack. This is a Cleanfeed return signal which outputs signal sum without AUX input to prevent feedback. |
Multichannel USB Output
All 16 multichannel USB output channels are received via 16 ch USB connector. ASIO and WDM is available for multichannel support.
| Connector | Default Source | Comment |
|---|---|---|
| USB 1 | Internal sum L | USB Stereo Output |
| USB 2 | Internal sum R | USB Stereo Output |
| USB 3 | USB 3/4 talk L | USB Stereo Output, used as a clean return, e.g. for video calls. |
| USB 4 | USB 3/4 talk R | USB Stereo Output, used as a clean return, e.g. for video calls. |
| USB 5 | Channel 1 processed L | Channel 1 after processing (see channel arrangement) |
| USB 6 | Channel 2 processed L | Channel 2 after processing (see channel arrangement) |
| USB 7 | AUX Input L | AUX Input |
| USB 8 | AUX Input R | AUX Input |
| USB 9 | Bluetooth Input L | Bluetooth Input |
| USB 10 | Bluetooth Input R | Bluetooth Input |
| USB 11 | Mic 1 in | Mic 1 before processing |
| USB 12 | Mic 2 in | Mic 2 before processing |
| USB 13 | Dante 1 | Dante 1 Input |
| USB 14 | Dante 2 | Dante 2 Input |
| USB 15 | Dante 3 | Dante 3 Input |
| USB 16 | Dante 4 | Dante 4 Input |
Stereo USB Output
Connected via stereo USB connector. stereo USB connector is class compliant and works with most devices. It acts as a talk output.
| Connector | Default Source | Comment |
|---|---|---|
| USB Stereo | Internal sum without USB Stereo Input | USB Stereo Output, used as a clean return, e.g. for video calls. Returns everything except USB Stereo Output. |
Dante Output
Dante Audio over IP is connected via Ethernet cable. For how to guides and functional requirements, check the documentation given by audinate: What is Dante?
The integrated Dante 4x4 interface is capable of running in AES67 mode. Learn More
| Connector | Default Source | Comment |
|---|---|---|
| Dante 1 | Internal sum L | Stereo Audio over IP Output |
| Dante 2 | Internal sum R | Stereo Audio over IP Output |
| Dante 3 | Dante 3/4 talk L | Stereo Audio over IP Output. Used as a clean return, e.g. for video calls. |
| Dante 4 | Dante 3/4 talk R | Stereo Audio over IP Output. Used as a clean return, e.g. for video calls. |